M-Audio M3-6 Monitors (Pair) SKU MA-S-M3-6
RRP $1,099.99

M-Audio M3-6 Monitors (Pair)

M-Audio M3-6 Monitors (Pair) SKU MA-S-M3-6
RRP $1,099.99

From the moment you lay eyes on their gorgeous wood baffles, Kevlar drivers and blue glowing LED power light, you can sense the very meticulous care that has gone into designing these powered reference speakers.

These M3-6 studio monitors surpass their unique styling with a sound that is as pleasing as it is accurate.

Do You Have Any Question ?

* required fields

Product Description


Thanks to their 3-way speaker configuration and 3 Amplifier design, M3-6s delver the stunning accuracy of a 3-Way, in a 2-way speaker footprint! The M3 series in-line tweeter means that these reference grade monitors wont dominate your studio space, yet can provide discerning engineers with phase accurate mids, highs and lows while minimising ear fatigue.

Are these the best studio monitors M-Audio have ever made? we think so and with a 6 inch woven Kevlar low frequency and rear porting, these units are well suited to a broad range of acoustic environments with enough bottom-end to cater for modern music tastes and then some.

If their natural frequency response isnt quite right for your room you can gently sculpt their tone with the rear EQ, Low Cut and volume controls and compare the difference with the flick of a switch.In a pro studio setup practicing sound engineers will want to keep RF and electrical noise to a minimum and the M3-6s do just this by providing XLR or quarter-inch balanced inputs as well as RCA un-balanced connectors on the rear panel.


Frequency response: 40 Hz - 22 kHz
Crossover frequency:

Low-Mid: 400 Hz
Mid-High: 4 kHz

Amplifier Power:

Low-frequency amplifier power: 110 W
Mid-frequency amplifier power: 30 W
High-frequency amplifier power: 20 W
LF cutoff switch: flat, 80 Hz, 100 Hz

Equalizer Controls:

LF: ± 6 dB boost/cut at 100 Hz
MF: ± 6 dB boost/cut at 1 kHz
HF: ± 6 dB boost/cut at 10 kHz
Bypass switch

Polarity: Positive signal at + input produces outward LF cone displacement
Input impedance: 20 k O balanced, 10 k O unbalanced
Input sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
Protection: Output current limiting; over-temperature; transient on/off protection to prevent speaker "pops"; subsonic filter; external mains fuse
Cabinet: Wood veneer front baffle with vinyl-laminated cabinet
Size (W x H x D): 9.25" x 15" x 9.06"; 235 mm x 381 mm x 230 mm
Weight: 23.15 lbs.; 10.5 kg